Reset Logbuffer; Security-Logfile Save - HPE FlexNetwork 5130 HI Series Network Management And Monitoring Command Reference

If the log file buffer is empty, this command displays a success message event though no logs are
saved to the log file.
Examples
# Manually save logs from the log file buffer to a log file.
<Sysname> logfile save
The contents in the log file buffer have been saved to the file flash:/logfile/logfile.log.
Related commands
info-center logfile enable
info-center logfile directory

reset logbuffer

Use reset logbuffer to clear the log buffer.
Syntax
reset logbuffer
Views
User view
Predefined user roles
network-admin
Examples
# Clear the log buffer.
<Sysname> reset logbuffer
Related commands
display logbuffer

security-logfile save

Use security-logfile save to manually save security logs from the security log file buffer to the
security log file.
Syntax
security-logfile save
Views
Any view
Predefined user roles
security-audit
Usage guidelines
The system clears the security log file buffer after saving the buffered security logs to the security log
file automatically or manually.
If the security log file buffer is empty, this command displays a success message event though no
security logs are saved to the security log file.
To use this command, a local user must have the security-audit user role. For information about
configuring the security-audit user role, see Security Command Reference.
352