Configuration Examples For Device Administration; Example: Setting The System Clock - Cisco Catalyst 9500 Manual

Administering the Device
Command
clear mac address-table dynamic address
mac-address
clear mac address-table dynamic interface
interface-id
clear mac address-table dynamic vlan vlan-id
show clock [detail]
show ip igmp snooping groups
show mac address-table address mac-address
show mac address-table aging-time
show mac address-table count
show mac address-table dynamic
show mac address-table interface interface-name
show mac address-table move update
show mac address-table multicast
show mac address-table notification {change |
mac-move | threshold}
show mac address-table secure
show mac address-table static
show mac address-table vlan vlan-id

Configuration Examples for Device Administration

Example: Setting the System Clock

This example shows how to manually set the system clock:
Device# clock set 13:32:00 23 July 2013
System Management Configuration Guide, Cisco IOS XE Amsterdam 17.2.x (Catalyst 9500 Switches)
Configuration Examples for Device Administration
Purpose
Removes a specific MAC address.
Removes all addresses on the specified physical port
or port channel.
Removes all addresses on a specified VLAN.
Displays the time and date configuration.
Displays the Layer 2 multicast entries for all VLANs
or the specified VLAN.
Displays MAC address table information for the
specified MAC address.
Displays the aging time in all VLANs or the specified
VLAN.
Displays the number of addresses present in all
VLANs or the specified VLAN.
Displays only dynamic MAC address table entries.
Displays the MAC address table information for the
specified interface.
Displays the MAC address table move update
information.
Displays a list of multicast MAC addresses.
Displays the MAC notification parameters and history
table.
Displays the secure MAC addresses.
Displays only static MAC address table entries.
Displays the MAC address table information for the
specified VLAN.
37