Configuration Examples For Eee - Cisco Nexus 7000 Series Configuration Manual

Configuration Examples for EEE

show interface ethernet slot/port counters detailed
Configuration Examples for EEE
This example shows how to enable EEE on an Ethernet interface:
switch# config t
switch(config)# interface ethernet 7/1
switch(config-if)# power efficient-ethernet auto
switch(config-if)# power efficient-ethernet sleep threshold aggressive
switch(config-if)# show interface ethernet 7/1
Ethernet7/1 is up
EEE(efficient-ethernet): Operational
Related Documents
Related Topic
EEE CLI commands
VDCs
Cisco Nexus 7000 Series NX-OS System Management Configuration Guide
398
Displays the following EEE statistics on the
interface:
• Tx LPI usecs—The amount of time (in
microseconds) that the transmitting link
partner waits before it starts transmitting
data after leaving LPI mode.
• Rx LPI usecs—The amount of time (in
microseconds) that the receiving link partner
requests that the transmitting link partner
wait before transmitting data after leaving
LPI mode.
• Tx LPI requests—The number of times that
the transmitting link partner makes a request
to enter LPI mode.
• Rx LPI indications—The number of times
the
receiving link partner detects that the
transmitting link partner has entered LPI
mode.
Document Title
Cisco Nexus 7000 Series NX-OS System Management
Command Reference
Cisco Nexus 7000 Series NX-OS Virtual Device
Context Configuration Guide
Configuring EEE