Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

How to Configure 802.1x Port-Based Authentication
SUMMARY STEPS
1. configure terminal
2. cisp enable
3. dot1x credentials profile
4. username suppswitch
5. password password
6. dot1x supplicant force-multicast
7. interface interface-id
8. switchport trunk encapsulation dot1q
9. switchport mode trunk
10. dot1x pae supplicant
11. dot1x credentials profile-name
12. end
13. show running-config interface interface-id
14. copy running-config startup-config
15. Configuring NEAT with Auto Smartports Macros
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2 cisp enable
Example:
Switch(config)# cisp enable
Step 3 dot1x credentials profile
Example:
Switch(config)# dot1x credentials test
Step 4
username suppswitch
Example:
Switch(config)# username suppswitch

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

1398
Purpose
Enters global configuration mode.
Enables CISP.
Creates 802.1x credentials profile. This must be attached
to the port that is configured as supplicant.
Creates a username.