Consolidated Platform Configuration Guide, Cisco Ios Release 15.2(4)E (Catalyst 2960-X Switches - Cisco Catalyst 2960 series Configuration Manual

How to Configure IP Source Guard
SUMMARY STEPS
1. enable
2. configure terminal
3. ip device tracking
4. interface interface-id
5. switchport mode access
6. switchport access vlan vlan-id
7. ip verify source[tracking] [mac-check ]
8. ip device tracking maximum number
9. end
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Step 2 configure terminal
Example:
Switch# configure terminal
Step 3
ip device tracking
Example:
Switch(config)# ip device tracking
Step 4 interface interface-id
Example:
Switch(config)# interface gigabitethernet
1/0/1
Step 5 switchport mode access
Example:
Switch(config-if)# switchport mode access

Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)

1296
Purpose
Enables privileged EXEC mode. Enter your password if
prompted.
Enters the global configuration mode.
Turns on the IP host table, and globally enables IP device
tracking.
Enters interface configuration mode.
Configures a port as access.