Related Topics
Flexible Authentication Ordering, on page 1347
Configuring Open1x
Beginning in privileged EXEC mode, follow these steps to enable manual control of the port authorization
state:
SUMMARY STEPS
1. configure terminal
2. interface interface-id
3. switchport mode access
4. authentication control-direction {both | in}
5. authentication fallback name
6. authentication host-mode [multi-auth | multi-domain | multi-host | single-host]
7. authentication open
8. authentication order [ dot1x | mab ] | {webauth}
9. authentication periodic
10. authentication port-control {auto | force-authorized | force-un authorized}
11. end
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2
interface interface-id
Example:
Switch(config)# interface gigabitethernet 1/0/1
Step 3
switchport mode access
Example:
Switch(config-if)# switchport mode access
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
How to Configure 802.1x Port-Based Authentication
Purpose
Enters the global configuration mode.
Specifies the port to be configured, and enter interface
configuration mode.
Sets the port to access mode only if you configured
the RADIUS server.
1407