Monitoring Dhcp Server Port-Based Address Allocation - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 9
copy running-config startup-config
Example:
Switch# copy running-config startup-config
What to Do Next
After enabling DHCP port-based address allocation on the switch, use the ip dhcp pool global configuration
command to preassign IP addresses and to associate them to clients.

Monitoring DHCP Server Port-Based Address Allocation

Table 120: Commands for Displaying DHCP Port-Based Address Allocation Information
Command
show interface interface id
show ip dhcp pool
show ip dhcp binding
Additional References
Related Documents
Related Topic
DHCP Configuration Information and Procedures
Purpose
Displays the status and configuration of a specific interface.
Displays the DHCP address pools.
Displays address bindings on the Cisco IOS DHCP server.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Configuring DHCP Server Port-Based Address Allocation
Purpose
(Optional) Saves your entries in the configuration file.
Document Title
IP Addressing: DHCP Configuration Guide, Cisco
IOS XE Release 3S
http://www.cisco.com/en/US/docs/ios-xml/ios/
ipaddr_dhcp/configuration/xe-3s/
dhcp-xe-3s-book.html
1287