Creating Named Standard Acls - Cisco Catalyst 2960 series Configuration Manual

How to Configure ACLs
Command or Action
[fragments] [log [log-input] [time-range
time-range-name] [dscp dscp]
Example:
Switch(config)# access-list 101 permit
igmp any any 14
Step 7 end
Example:
Switch(config)# end

Creating Named Standard ACLs

Follow these steps to create a standard ACL using names:
SUMMARY STEPS
1. enable
2. configure terminal
3. ip access-list standard name
4. Use one of the following:
5. end
6. show running-config
7. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Switch> enable
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1188
Purpose
Returns to privileged EXEC mode.
• deny {source [source-wildcard] | host source | any} [log]
• permit {source [source-wildcard] | host source | any} [log]
Purpose
Enables privileged EXEC mode. Enter your password if
prompted.