Viewing Keys And Certificates - Cisco Catalyst 2960 series Configuration Manual

Monitoring and Maintaining Certification Authority
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2
show crypto pki certificates
Example:
Device# show crypto pki certificates
Step 3 configure terminal
Example:
Device# configure terminal
Step 4 crypto pki certificate chain name
Example:
Device(config)# crypto pki certificate chain
myca
Step 5 no certificate certificate-serial-number
Example:
Device(config-cert-chain)# no certificate
0123456789ABCDEF0123456789ABCDEF
Step 6
exit
Example:
Device(config-cert-chain)# exit
Step 7 no crypto pki import name certificate
Example:
Device(config)# no crypto pki import MS
certificate
Step 8 exit
Example:
Device(config)# exit

Viewing Keys and Certificates

Perform the following task toview keys and certificates:
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1158
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Displays information about your device certificate, the
certification authority (CA) certificate, and any
registration authority (RA) certificates.
Enters global configuration mode.
Enters certificate chain configuration mode.
Deletes the certificate.
Exits certificate chain configuration mode and returns
to global configuration mode.
Deletes a certificate manually.
Exits global configuration mode and returns to privileged
EXEC mode.