X Readiness Check - Cisco Catalyst 2960 series Configuration Manual

Consolidated platform configuration guide, ios release 15.2(4)e
Hide thumbs Also See for Catalyst 2960 series:
Table of Contents

Advertisement

Attribute Number
Attribute[30]
Attribute[31]
Attribute[40]
Attribute[41]
Attribute[42]
Attribute[43]
Attribute[44]
Attribute[45]
Attribute[46]
Attribute[49]
Attribute[61]
17 The Framed-IP-Address AV pair is sent only if a valid Dynamic Host Control Protocol (DHCP) binding exists for the host in the DHCP snooping bindings
table.
You can view the AV pairs that are being sent by the switch by entering the debug radius accounting
privileged EXEC command.

802.1x Readiness Check

The 802.1x readiness check monitors 802.1x activity on all the switch ports and displays information about
the devices connected to the ports that support 802.1x. You can use this feature to determine if the devices
connected to the switch ports are 802.1x-capable. You use an alternate authentication such as MAC
authentication bypass or web authentication for the devices that do not support 802.1x functionality.
This feature only works if the supplicant on the client supports a query with the NOTIFY EAP notification
packet. The client must respond within the 802.1x timeout value.
Related Topics
Configuring 802.1x Readiness Check, on page 1356
Switch-to-RADIUS-Server Communication
RADIUS security servers are identified by their hostname or IP address, hostname and specific UDP port
numbers, or IP address and specific UDP port numbers. The combination of the IP address and UDP port
number creates a unique identifier, which enables RADIUS requests to be sent to multiple UDP ports on a
server at the same IP address. If two different host entries on the same RADIUS server are configured for the
AV Pair Name
Called-Station-ID
Calling-Station-ID
Acct-Status-Type
Acct-Delay-Time
Acct-Input-Octets
Acct-Output-Octets
Acct-Session-ID
Acct-Authentic
Acct-Session-Time
Acct-Terminate-Cause
NAS-Port-Type
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Information About 802.1x Port-Based Authentication
START
INTERIM
Always
Always
Always
Always
Always
Always
Always
Always
Never
Always
Never
Always
Always
Always
Always
Always
Never
Always
Never
Never
Always
Always
STOP
Always
Always
Always
Always
Always
Always
Always
Always
Always
Always
Always
1333

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents