Configuring Mac Authentication Bypass - Cisco Catalyst 2960 series Configuration Manual

How to Configure 802.1x Port-Based Authentication
Command or Action
Step 4
end
Example:
Switch(config-if)# end
Step 5 show authentication sessions interface interface-id
Example:
Switch# show authentication sessions interface
gigabitethernet2/0/3
Step 6 copy running-config startup-config
Example:
Switch# copy running-config startup-config

Configuring MAC Authentication Bypass

Beginning in privileged EXEC mode, follow these steps to enable MAC authentication bypass. This procedure
is optional.
SUMMARY STEPS
1. configure terminal
2. interface interface-id
3. authentication port-control auto
4. mab [eap]
5. end
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
Switch# configure terminal
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1388
Purpose
Returns to privileged EXEC mode.
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Purpose
Enters the global configuration mode.