Monitoring Secure Http Server And Client Status - Cisco Catalyst 2960 series Configuration Manual

Command or Action
Step 11
crypto ca authentication name
Example:
Switch(config)# crypto ca authentication
your_trustpoint
Step 12 crypto ca enroll name
Example:
Switch(config)# crypto ca enroll
your_trustpoint
Step 13
end
Example:
Switch(config)# end

Monitoring Secure HTTP Server and Client Status

To monitor the SSL secure server and client status, use the privileged EXEC commands in the following table.
Table 111: Commands for Displaying the SSL Secure Server and Client Status
Command
show ip http client secure status
show ip http server secure status
show running-config
Purpose
Authenticates the CA by getting the public key of the CA. Use the
same name used in Step 5.
Obtains the certificate from the specified CA trustpoint. This
command requests a signed certificate for each RSA key pair.
Returns to privileged EXEC mode.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
Monitoring Secure HTTP Server and Client Status
Purpose
Shows the HTTP secure client configuration.
Shows the HTTP secure server configuration.
Shows the generated self-signed certificate for secure
HTTP connections.
1137