Configuring A Root Ca (Trusted Root) - Cisco Catalyst 2960 series Configuration Manual

How to Configure Certification Authority
Command or Action
Step 12
end
Example:
Device(ca-trustpoint)# end

Configuring a Root CA (Trusted Root)

SUMMARY STEPS
1. enable
2. configure terminal
3. crypto ca trustpoint name
4. revocation-check method1 [method2 method3]
5. root tftp server-hostname filename
6. enrollment http-proxy hostname port-number
7. end
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 configure terminal
Example:
Device# configure terminal
Step 3 crypto ca trustpoint name
Example:
Device(config)# crypto ca trustpoint ka
Step 4 revocation-check method1 [method2 method3]
Example:
Device(ca-trustpoint)# revocation-check ocsp
Step 5 root tftp server-hostname filename
Example:
Device(ca-trustpoint)# root tftp server1 file1
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1150
Purpose
Exit CA trustpoint configuration mode and returns to
privileged EXEC mode.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Declares the trustpoint that your device should use and
enters CA trustpoint configuration mode.
Checks the revocation status of a certificate.
Obtains the certification authority (CA) certificate via
TFTP.