Recommended Configuration Procedure For Assigning A Trunk Port To A Vlan - HP FlexNetwork NJ5000 User Manual

Step
Selecting VLANs
a.
Specify the range of VLANs available
for selection during related operations.
Configure a subset of all existing
VLANs. This step is required before you
perform operations on the Detail,
Modify VLAN, and Modify Port tabs.
Modifying a VLAN
b.
Configure the access ports as
untagged members of the specified
VLAN.
Modifying
5.
Recommended configuration procedure for assigning a trunk
port to a VLAN
Step
Creating
1.
Configuring the link type of a
2.
Setting the PVID for a
3.
Configure the trunk port as an untagged
4.
member of the specified VLANs:
Selecting VLANs
a.
Specify the range of VLANs available
for selection during related operations.
Configure a subset of all existing
VLANs. This step is required before you
perform operations on the Detail,
Modify VLAN, and Modify Port tabs.
Modifying a VLAN
b.
Configure the trunk port as an untagged
member of the specified VLANs.
Modifying
5.
Configure the trunk port as a tagged
6.
member of the specified VLANs:
Selecting VLANs
a.
Specify the range of VLANs available
for selection during related operations.
Configure a subset of all existing
VLANs. This step is required before you
perform operations on the Detail,
Modify VLAN, and Modify Port tabs.
Modifying a VLAN
b.
Configure the trunk port as a tagged
ports.
VLANs.
port.
port.
ports.
Remarks
Configure the untagged
VLAN of the port.
Remarks
Required.
Create one or multiple VLANs.
Optional.
Configure the link type of the port as trunk.
To configure a hybrid port as a trunk port, first configure it
as an access port.
By default, the link type of a port is access.
Configure the PVID of
the trunk port.
N/A
Configure the untagged
VLAN of the trunk port.
N/A
110
PVID. The three
operations produce the
same result, and the latest
operation takes effect.
By default, an access port
is an untagged member of
VLAN 1.
Required.
A trunk port has only one
untagged VLAN and the
untagged VLAN is its PVID.
The three operations produce
the same result, and the latest
operation takes effect.
By default, the untagged
VLAN of a trunk port is VLAN
1.
When you change the
untagged VLAN (PVID) of a
trunk port, the former
untagged VLAN automatically
becomes a tagged VLAN of
the trunk port.
Required.
A trunk port can have multiple
tagged VLANs. You can
repeat these steps to
configure multiple tagged
VLANs for the trunk port.