Configuring A Rule For An Advanced Ipv4 Acl - HP FlexNetwork NJ5000 User Manual

Item
Source IP Address
Source Wildcard
Time Range

Configuring a rule for an advanced IPv4 ACL

Select QoS > ACL IPv4 from the navigation tree.
1.
Click the Advance Setup tab.
2.
The rule configuration page for an advanced IPv4 ACL appears.
Figure 431 Configuring an advanced IPv4 ACL
Description
Select the Source IP Address box and enter a source IPv4 address and a
wildcard mask, in dotted decimal notation.
Select the time range during which the rule takes effect.
389