Mld Snooping Configuration Example; Configuration Procedure - HP 1910 User Manual

Field
Group Address
Router Ports
Member Ports

MLD snooping configuration example

Network requirements
As shown in
as the MLD querier.
Perform the configuration so that Host A can receive the IPv6 multicast packets destined for the IPv6
multicast group FF1E::101, and Switch A drops the unknown IPv6 multicast packets rather than flooding
them in the VLAN.
Figure 261 Network diagram

Configuration procedure

Configuring Router A
Enable IPv6 multicast routing, assign IPv6 address to each interface, enable IPv6 PIM-DM on each
interface, and enable MLD on Ethernet 1/1. (Details not shown.)
Configuring Switch A
1. Create VLAN 100:
a. Select Network > VLAN from the navigation tree.
b. Click the Create tab.
c. Enter 100 as the VLAN ID.
d. Click Apply.
Description
IPv6 multicast group address.
All router ports.
All member ports.
Figure 261, MLDv1 runs on Router A and MLDv1 snooping runs on Switch A. Router A acts
296