Configuring Users; Configuring A Local User - HP FlexNetwork NJ5000 User Manual

Configuring users

You can configure local users and create groups to manage them.
A local user represents a set of user attributes configured on a device (such as the user password,
use type, service type, and authorization attribute), and is uniquely identified by the username. For a
user to pass local authentication, you must add an entry for the user in the local user database of the
device. For more information about local authentication, see
A user group consists of a group of local users and has a set of local user attributes. You can
configure local user attributes for a user group to implement centralized management of user
attributes for the local users in the group. All local users in a user group inherit the user attributes of
the group. However, if you configure user attributes for a local user, the settings for the local user
take precedence over the settings for the user group.
By default, every newly added local user belongs to a user group named system, which is created
automatically by the system.

Configuring a local user

Select Authentication > Users from the navigation tree to enter the Local User tab, which
1.
displays all local users.
Figure 346 Local user list
Click Add.
2.
The page for adding a local user appears.
"Configuring
321
AAA."