HP flexnetwork 5510 hi series Installation Manual

Hide thumbs
HPE FlexNetwork 5510 HI Switch Series
Part number: 5200-0020b
Document version: 6W101-20160930

Advertising

   Related Manuals for HP flexnetwork 5510 hi series

   Summary of Contents for HP flexnetwork 5510 hi series

  • Page 1: Installation Guide

    HPE FlexNetwork 5510 HI Switch Series Installation Guide Part number: 5200-0020b Document version: 6W101-20160930...

  • Page 2

    © Copyright 2016 Hewlett Packard Enterprise Development LP The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.

  • Page 3: Table Of Contents

    Contents Preparing for installation ················································································· 1   Safety recommendations ··································································································································· 1   Examining the installation site ···························································································································· 2   Temperature/humidity ································································································································ 2   Cleanliness ················································································································································· 2   EMI ····························································································································································· 3   Laser safety ················································································································································ 3   Installation tools ················································································································································· 3  ...

  • Page 4: Table Of Contents

    Symptom ·················································································································································· 40   Solution ···················································································································································· 40   Fan tray failure ················································································································································· 40   Removing a fan tray ································································································································· 41   Installing a fan tray ··································································································································· 41   Configuration terminal display problems ·········································································································· 42   No display ················································································································································ 42   Garbled display ········································································································································...

  • Page 5

    Index ············································································································· 72  ...

  • Page 6: Preparing For Installation, Safety Recommendations

    Preparing for installation Table 1 HPE 5510 HI switches, power supplies, and interface cards Product code HPE description Alias HPE 5510 HI switches JH145A HPE 5510 24G 4SFP+ HI 1-slot Switch HPE 5510 24G 4SFP+ HI JH146A HPE 5510 48G 4SFP+ HI 1-slot Switch HPE 5510 48G 4SFP+ HI JH147A HPE 5510 24G PoE+ 4SFP+ HI 1-slot Switch...

  • Page 7: Examining The Installation Site

    • Before cleaning the switch, remove all power cords from the switch. Do not clean the switch with a wet cloth or liquid. • Do not place the switch near water or in a damp environment. Prevent water or moisture from entering the switch chassis.

  • Page 8: Laser Safety, Installation Tools

    Table 2 Dust concentration limit in the equipment room Substance Concentration limit (particles/m³) Dust ≤ 3 x 10 (no visible dust on the tabletop over three days) NOTE: Dust diameter ≥ 5 μm The equipment room must also meet limits on salts, acids, and sulfides to eliminate corrosion and premature aging of components, as shown in Table Table 3 Harmful gas limits in the equipment room...

  • Page 9: Installation Accessories

    • ESD wrist strap All these installation tools are user supplied. Installation accessories All the installation accessories except M6 screws and floating nuts, the HPE X721 power to port fan tray, PSR150/PSR150-A1 (JD362A/JD362B) AC power supplies, and the PSR150-D/PSR150-D1 (JD366A/JD366B) DC power supplies are provided with the switch. Table 4 Installation accessories Product Description...

  • Page 10

    Product Description Quantity Applicable models code • HPE 5510 48G PoE+ 4SFP+ HI Interface card filler panel 5190-0296 All HPE 5510 HI switches HPE X722 port to power fan tray (already installed on the switch) 5060-0174 All HPE 5510 HI switches HPE X721 power to port fan tray (order as required) 5060-0175...

  • Page 11: Installing The Switch

    Installing the switch CAUTION: Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open the chassis, contact HPE for permission. Otherwise, HPE shall not be liable for any consequence. Figure 1 Hardware installation flow Start Install the switch Ground the switch...

  • Page 12: Installing The Switch In A 19-inch Rack

    Installing the switch in a 19-inch rack Installation accessories Table 5 Installation accessories for the HPE 5510 HI switches Installat Installation Chassis Installation requirements access procedure ories • HPE 5510 24G 4SFP+ Front The mounting bracket kit can be "Rack-mounting by •...

  • Page 13: Mounting Bracket Kits

    NOTE: If a rack shelf is available, you can put the switch on the rack shelf, slide the switch to an appropriate location, and attach the switch to the rack by using the mounting brackets. Mounting bracket kits Table 6 Mounting bracket kits for the HPE 5510 HI switches HPE 5510 24G SFP 4SFP+ HPE 5510 24G PoE+ 4SFP+ Mounting bracket kits...

  • Page 14: Rack-mounting By Using Front Mounting Brackets

    Rack-mounting by using front mounting brackets This task requires two people. To install the switch in a 19-inch rack by using the front mounting brackets: Wear an ESD wrist strap and make sure it makes good skin contact and is reliably grounded. Determine the mounting position on the switch for the front mounting brackets.

  • Page 15

    Figure 8 Attaching the front mounting bracket to the mid-mounting position Mount the chassis in the rack: a. One person supports the chassis bottom with one hand, holds the front part of the chassis with the other hand, and pushes the chassis into the rack gently b.

  • Page 16

    Figure 10 Mounting the switch in the rack (front mounting brackets at the power supply side) Figure 11 Mounting the switch in the rack (front mounting brackets at the mid-mounting position)

  • Page 17: Rack-mounting By Using Front And Rear Mounting Brackets (hpe 5510 24g Poe+ 4sfp+ Hi And Hpe

    Rack-mounting by using front and rear mounting brackets (HPE 5510 24G PoE+ 4SFP+ HI and HPE 5510 48G PoE+ 4SFP+ HI) This mounting method is applicable to only the HPE 5510 24G PoE+ 4SFP+ HI and HPE 5510 48G PoE+ 4SFP+ HI switches. You can install the front mounting brackets at the port-side or power-side mounting position as needed.

  • Page 18

    Figure 13 Attaching the rear mounting brackets to the rack with the wide flange inside the rack   Figure 14 Attaching the rear mounting brackets to the rack with the wide flange outside the rack Mount the switch chassis in the rack: a.

  • Page 19

    b. The other person aligns the oval holes in the front brackets with the mounting holes in the front rack posts, and attaches the front mounting brackets with M6 screws (user supplied) to the front rack posts. Tighten the screws and make sure the front and rear mounting brackets have securely attached the switch to the rack.

  • Page 20: Mounting The Switch On A Workbench, Grounding The Switch

    Mounting the switch on a workbench IMPORTANT: • Ensure good ventilation and 10 cm (3.9 in) of clearance around the chassis for heat dissipation. • Avoid placing heavy objects on the switch. To mount the switch on a workbench: Verify that the workbench is sturdy and reliably grounded. Place the switch with bottom up, and clean the round holes in the chassis bottom with dry cloth.

  • Page 21

    Figure 17 Connecting the grounding cable to the chassis (1) Grounding screw (2) Ring terminal (3) Grounding sign (4) Grounding hole (5) Grounding cable Connecting the grounding cable to a grounding strip (for the HPE 5510 24G PoE+ 4SFP+ HI and HPE 5510 48G PoE+ 4SFP+ HI switches) Remove the hex nut of a grounding post on the grounding strip.

  • Page 22: Grounding The Switch With A Grounding Conductor Buried In The Earth Ground

    Figure 19 Connecting the grounding cable to a grounding strip (1) Grounding post (2) Grounding strip (3) Grounding cable (4) Hex nut Connecting the grounding cable to a grounding strip (for the HPE 5510 24G 4SFP+ HI, HPE 5510 48G 4SFP+ HI, and HPE 5510 24G SFP 4SFP+ HI switches) Remove the hex nut of a grounding post on the grounding strip.

  • Page 23: Grounding The Switch By Using The Ac Power Cord

    Figure 21 Grounding the switch by burying the grounding conductor into the earth ground (1) Grounding screw (2) Chassis rear panel (3) Grounding cable (4) Earth (5) Joint (6) Grounding conductor Grounding the switch by using the AC power cord If the installation site has no grounding strips or earth ground, you can ground an AC-powered switch through the PE wire of the power cord.

  • Page 24: Installing A Psr150(jd362a, Jd362b, Jd366a, Or Jd366b) Power Supply

    Figure 22 Installation procedure Figure 23 Removal procedure Turn off the circuit Disconnect the power Remove the power breaker cord supply Installing a PSR150(JD362A, JD362B, JD366A, or JD366B) power supply CAUTION: To prevent damage to the power supply or the connectors on the backplane, insert the power supply gently.

  • Page 25: Removing A Psr150(jd362a, Jd362b, Jd366a, Or Jd366b) Power Supply

    bottom with the other, and slide the power supply slowly along the guide rails into the slot (see callout 1 in Figure 25). Fasten the captive screws on the power supply with a Phillips screwdriver to secure the power supply in the chassis (see callout 2 in Figure 25).

  • Page 26: Removing A Psr720-56a/psr1110-56a (jg544a/jg545a) Power Supply

    Figure 26 Removing the filler panel Unpack the power supply and verify that the power supply model is correct. Put away the packaging box and packaging bag of the power supply for future use. Correctly orient the power supply with the power supply slot (use the letters on the power supply faceplate for orientation), grasp the handle of the power supply with one hand and support its bottom with the other, and slide the power supply slowly along the guide rails into the slot until you hear that the latch of the power supply clicks into the slot.

  • Page 27: Connecting The Power Cord

    Disconnect the power cord. Press the latch towards the handle, and pull the power supply along the guide rails until it is part-way out. Grasp the handle of the power supply with one hand, support the bottom with the other hand, and pull the power supply slowly along the guide rails out of the slot.

  • Page 28: Connecting The Psr150-d/psr150-d1 (jd366a/jd366b) Power Supply

    Connecting the PSR150-D/PSR150-D1 (JD366A/JD366B) power supply WARNING! • HPE DC power cords are required if the –48 VDC power source is used. RPS power cords are required if the RPS power source is used. • The power cord color code scheme in Figure 29 is for illustration only.

  • Page 29: Installing An Interface Card

    Plug the female connector end of the AC power cord into the AC input socket of the power supply (see callout 1 in Figure 30). Use a cable tie to secure the power cord to the handle of the power supply (see callout 2 and callout 3 in Figure 30).

  • Page 30

    Figure 31 Removing the filler panel over an interface card slot Unpack the interface card. (Optional.) Rotate out the ejector lever. Gently push the interface card into the slot along the guide rails until the interface card has good contact with the switch chassis (Optional.) Rotate in the ejector lever.

  • Page 31: Removing An Interface Card, Verifying The Installation

    Figure 32 Installing an interface card with an ejector lever Removing an interface card Wear an ESD wrist strap and make sure it makes good skin contact and is reliably grounded. Use a Phillips screwdriver to completely loosen the captive screw on the interface card. Rotate rightward the ejector lever on the interface card.

  • Page 32

    • The power cords are correctly connected. • All the interface cables are cabled indoors. If any cable is routed outdoors, verify that the socket strip with lightning protection and lightning arresters for network ports have been correctly connected.

  • Page 33: Accessing The Switch For The First Time, Setting Up The Configuration Environment

    Accessing the switch for the first time Setting up the configuration environment You can access the HPE 5510 HI switch through the serial console port or the mini USB console port. As a best practice, use the serial console port to access the switch. To access the switch through the mini USB console port, you need to prepare a mini USB console cable.

  • Page 34: Connecting The Mini Usb Console Cable

    RJ-45 Signal DB-9 Signal To connect a configuration terminal (for example, a PC) to the switch: Plug the DB-9 female connector of the console cable to the serial port of the PC. Connect the RJ-45 connector to the console port of the switch. NOTE: •...

  • Page 35

    Figure 35 Device Driver Installation Wizard Click Continue Anyway if the following dialog box appears. Figure 36 Software Installation Click Finish.

  • Page 36: Setting Terminal Parameters, Powering On The Switch

    Figure 37 Completing the device driver installation wizard Setting terminal parameters To configure and manage the switch through the console port, you must run a terminal emulator program, TeraTermPro or PuTTY, on your PC. You can use the emulator program to connect a network device, a Telnet site, or an SSH site.

  • Page 37

    with software versions. For more information about Boot ROM menu options, see the software-matching release notes for the device. After the startup completes, you can access the CLI to configure the switch. For more information about the configuration commands and CLI, see HPE 5510 HI Switch Series Configuration Guides and HPE 5510 HI Switch Series Command References.

  • Page 38: Setting Up An Irf Fabric, Irf Fabric Setup Flowchart

    Setting up an IRF fabric You can use HPE IRF technology to connect and virtualize HPE 5510 HI switches into a large virtual switch called an "IRF fabric" for flattened network topology, and high availability, scalability, and manageability. IRF fabric setup flowchart Figure 38 IRF fabric setup flowchart To set up an IRF fabric: Step...

  • Page 39: Planning Irf Fabric Setup, Planning Irf Fabric Size And The Installation Site

    Step Description switches workbench." Connect ground wires "Grounding the switch" and "Connecting the power cord." and power cords Power on the switches Configure basic IRF See HPE 5510 HI Switch Series IRF Configuration Guide. settings Connect physical IRF ports on switches. Use SFP+/QSFP+ transceiver modules and fibers to connect 10-Gigabit SFP+ ports/40-Gigabit QSFP+ ports over a long distance, or use SFP+/QSFP+ DAC cables to connect Connect the physical...

  • Page 40: Planning Irf Topology And Connections

    Planning IRF topology and connections You can create an IRF fabric in daisy chain topology or more reliable ring topology. In ring topology, the failure of one IRF link does not cause the IRF fabric to split as in daisy chain topology. Instead, the IRF fabric changes to a daisy chain topology without interrupting network services.

  • Page 41: Identifying Physical Irf Ports On The Member Switches, Planning The Cabling Scheme

    Identifying physical IRF ports on the member switches Identify the physical IRF ports on the member switches according to your topology and connection scheme. Table 9 shows the physical ports that can be used for IRF connection and the port use restrictions. Table 9 Physical IRF port requirements Candidate physical IRF ports Requirements...

  • Page 42

    Figure 41 Connecting the switches in one rack...

  • Page 43: Configuring Basic Irf Settings, Connecting The Physical Irf Ports

    Figure 42 IRF fabric topology Connecting the IRF member switches in a ToR solution You can install IRF member switches in different racks side by side to deploy a top of rack (ToR) solution. Figure 43 shows an example for connecting 9 top of rack IRF member switches by using SFP+/QSFP+ transceiver modules and optical fibers.

  • Page 44: Verifying The Irf Fabric Setup

    Wear an ESD wrist strap when you connect SFP+/QSFP+ DAC cables or SFP+/QSFP+ transceiver modules and fibers. For how to connect them, see Pluggable SFP[SFP+][XFP][SFP28] Transceiver Modules Installation Guide. Verifying the IRF fabric setup To verify the basic functionality of the IRF fabric after you finish configuring basic IRF settings and connecting IRF ports: Log in to the IRF fabric through the console port of any member switch.

  • Page 45: Maintenance And Troubleshooting, Power Supply Failure

    Maintenance and troubleshooting Power supply failure Symptom The power supply status LEDs are not steady green. For the HPE 5510 24G SFP 4SFP+ HI, HPE 5510 24G 4SFP+ HI, and HPE 5510 48G 4SFP+ HI, examine the PWR1 or PWR2 LED of the switch to identify power supply failure. For the HPE 5510 24G PoE+ 4SFP+ HI and HPE 5510 48G PoE+ 4SFP+ HI, examine the PWR1 or PWR2 LED of the switch and the LEDs on the power supply to identify power supply failure.

  • Page 46: Removing A Fan Tray, Installing A Fan Tray

    Removing a fan tray WARNING! • Do not touch any bare conductors or terminals on the fan tray. • Do not place the fan tray in a moist place. Prevent liquid from entering the fan tray. • Do not disassemble faulty fan trays yourself. When the internal wiring or components of a fan tray are faulty, ask maintenance engineers for maintenance.

  • Page 47: Configuration Terminal Display Problems

    Grasp the two handles of the fan tray with the side marked TOP facing up, and slide the fan tray along the guide rails into the slot until the fan tray seats in the slot and has a firm contact with the backplane.

  • Page 48

    Verify that the following settings are configured for the terminal: Baud rate—9,600. Data bits—8. Parity—None. Stop bits—1. Flow control—None. If the problem persists, contact HPE Support.

  • Page 49: Appendix A Chassis Views And Technical Specifications, Chassis Views

    Appendix A Chassis views and technical specifications Chassis views HPE 5510 24G SFP 4SFP+ HI Figure 46 HPE 5510 24G SFP 4SFP+ HI front panel (1) SFP port (2) SFP port LED (3) 10/100/1000Base-T autosensing Ethernet port (4) 10/100/1000Base-T autosensing Ethernet port LED (5) Management Ethernet port (6) Console port (CONSOLE) (7) Mini USB console port...

  • Page 50: Hpe 5510 24g 4sfp+ Hi

    The HPE 5510 24G SFP 4SFP+ HI switch comes with a filler panel in the interface card slot. You can select an interface card for the switch as required. In this figure, an LSWM2SP2PM interface card is installed in the interface card slot. For more information about installing and removing an interface card, see "Installing/removing an interface card."...

  • Page 51: Hpe 5510 24g Poe+ 4sfp+ Hi

    HPE 5510 24G PoE+ 4SFP+ HI Figure 50 HPE 5510 24G PoE+ 4SFP+ HI front panel (1) 10/100/1000Base-T autosensing Ethernet port (2) 10/100/1000Base-T autosensing Ethernet port (3) Management Ethernet port (4) Console port (CONSOLE) (5) Mini USB console port (6) Port LED mode switching button (7) USB port (8) System status LED (SYS) (9) SFP+ port...

  • Page 52: Hpe 5510 48g 4sfp+ Hi

    HPE 5510 48G 4SFP+ HI Figure 52 HPE 5510 48G 4SFP+ HI front panel (1) 10/100/1000Base-T autosensing Ethernet port (2) 10/100/1000Base-T autosensing Ethernet port (3) Management Ethernet port (4) Console port (CONSOLE) (5) Mini USB console port (6) Port LED mode switching button (7) USB port (8) System status LED (SYS) (9) SFP+ port...

  • Page 53: Hpe 5510 48g Poe+ 4sfp+ Hi

    HPE 5510 48G PoE+ 4SFP+ HI Figure 54 HPE 5510 48G PoE+ 4SFP+ HI front panel (1) 10/100/1000Base-T autosensing Ethernet port (2) 10/100/1000Base-T autosensing Ethernet port (3) Management Ethernet port (4) Console port (CONSOLE) (5) Mini USB console port (6) Port LED mode switching button (7) USB port (8) System status LED (SYS) (9) SFP+ port...

  • Page 54: Technical Specifications

    Technical specifications Table 11 Technical specifications for non-PoE switch models HPE 5510 24G SFP HPE 5510 24G 4SFP+ Item HPE 5510 48G 4SFP+ HI 4SFP+ HI 43.6 × 440 × 360 mm 43.6 × 440 × 360 mm 43.6 × 440 × 360 mm Dimensions (1.72 ×...

  • Page 55

    HPE 5510 24G SFP HPE 5510 24G 4SFP+ Item HPE 5510 48G 4SFP+ HI 4SFP+ HI • • • Single DC input: 146 Single DC input: 111 Dual DC inputs: 130 W • • Dual DC inputs: 133 W Dual DC inputs: 115 W Chassis leakage UL60950-1, EN60950-1, IEC60950-1, GB4943...

  • Page 56

    Item HPE 5510 24G PoE+ 4SFP+ HI HPE 5510 48G PoE+ 4SFP+ HI Depends on the power supply configurations. For more information, see the following PoE power capacity table. Minimum power 67 W 75 W consumption Maximum power consumption (including PoE 1000 W 1800 W power...

  • Page 57: Appendix B Frus And Compatibility Matrixes, Hot Swappable Power Supplies

    Appendix B FRUs and compatibility matrixes FRUs and compatibility matrixes HPE 5510 24G 4SFP+ HI HPE 5510 24G PoE+ 4SFP+ HI FRUs HPE 5510 48G 4SFP+ HI HPE 5510 48G PoE+ 4SFP+ HI HPE 5510 24G SFP 4SFP+ HI Hot swappable power supplies PSR150-A/PSR150 -A1(JD362A/JD362 Supported...

  • Page 58: Hot Swappable Interface Cards

    Power supply Specifications Reference • Max input voltage range: 90 VAC to 264 VAC @ 47 Hz to 63 Hz • Max output power: 150 W • Rated input voltage range: –48 VDC to –60 VDC HPE PSR150-A & PSR150-D/PSR150-D1 •...

  • Page 59: Interface Card Operating Mode

    Interface card operating mode On the HPE 5510 48G 4SFP+ HI and HPE 5510 48G PoE+ 4SFP+ HI switches, you can use the port-configuration-mode command to configure one of the following operating modes for the LSWM2QP2P interface card. This command is used when two QSFP+ ports on the interface card are split into eight SFP+ ports.

  • Page 60: Appendix C Ports And Leds, Console Port, Management Ethernet Port, Usb Port

    Appendix C Ports and LEDs Ports Console port The switch has two console ports: a serial console port and a Mini USB console port. Table 13 Console port specifications Item Console port Mini USB console port Connector type RJ-45 Mini USB Type B Compliant standard EIA/TIA-232 USB 2.0...

  • Page 61: Base-t Autosensing Ethernet Port

    10/100/1000Base-T autosensing Ethernet port Table 15 10/100/1000Base-T autosensing Ethernet port specifications Item Specification Connector type RJ-45 • 10 Mbps, full duplex • 100 Mbps, full duplex Interface attributes • 1000 Mbps, full duplex • MDI/MDI-X, auto-sensing Max transmission 100 m (328.08 ft) distance Transmission medium Category-5 (or above) twisted pair cable...

  • Page 62: Sfp+ Port

    NOTE: • To guarantee the functionality of the SFP ports, use only HPE SFP transceiver modules. • The SFP transceiver modules available for the switch are subject to change over time. For the most up-to-date list of SFP transceiver modules, consult your HPE sales representative or technical support engineer.

  • Page 63

    Produ Central Cable/fiber Modal Connecto wavelengt diameter bandwidth transmissio description code h (nm) (µm) (MHz × km) n distance 10-U 9/125 miles) RX: 1490 Transceiver HPE X120 1G TX: 1490 SFP LC BX JD099B 10-D RX: 1310 Transceiver HPE X120 1G Category-5 100 m (328.08 JD089B...

  • Page 64: Qsfp+ Port

    Product code HPE description Max transmission distance JD097C HPE X240 10G SFP+ SFP+ 3m DA Cable 3 m (9.84 ft) JG081C HPE X240 10G SFP+ SFP+ 5m DA Cable 5 m (16.40 ft) Figure 56 SFP+ DAC cable (1) Connector (2) Pull latch NOTE: •...

  • Page 65

    Produ Central Cable/fiber Modal Connecto wavelengt diameter bandwidth transmissio description code h (nm) (µm) (MHz × km) n distance Four lanes: HPE X140 • 1271 40G QSFP+ 10km (6.21 • JG661A LC LR4 SM 1291 9/125 miles) 10km 1310nm • 1311 Transceiver •...

  • Page 66: Combo Interface

    Figure 57 40G QSFP+ DAC cable (1) Connector (2) Pull tab Figure 58 40G QSFP+ to 4x10G SFP+ DAC cable (1) QSFP+ module (2) QSFP+ side pull tab (3) SFP+ side pull tab (4) SFP+ module NOTE: • As a best practice, use HPE QSFP+ transceiver modules, QSFP+ DAC cables, or QSFP+ to 4 x SFP+ DAC cables for the QSFP+ ports on the switch.

  • Page 67: System Status Led

    LEDs System status LED The system status LED shows the operating state of the switch. Table 23 System status LED description LED mark Status Description Steady green The switch is operating correctly. Flashing green (1 Hz) The switch is performing power-on self test (POST). Steady red The switch has failed the POST or is faulty.

  • Page 68: Base-t Autosensing Ethernet Port Led

    LED mark Status Description 4SFP+ HI switches) the ports. The port status LEDs indicates the IRF member ID of the switch. For example, if the LEDs for ports 1 to Flashing yellow 5 are steady green and the other LEDs are off, the IRF member ID of the switch is 5.

  • Page 69: Management Ethernet Port Leds

    Table 27 100/1000Base-X SFP port LED description MODE LED SFP port LED Description status status A link is present on the port and The port is operating at 1000 Steady green Mbps. The port LED fast flashes when the port is sending or receiving data.

  • Page 70: Interface Card Status Led

    Management Ethernet port LED (ACT/LINK) Description status Yellow The port is sending or receiving data. Flashing yellow (3 Hz) The port has failed POST. No link is present on the port. Interface card status LED The HPE 5510 24G 4SFP+ HI, HPE 5510 48G 4SFP+ HI, HPE 5510 24G SFP 4SFP+ HI, HPE 5510 24G PoE+ 4SFP+ HI, and HPE 5510 48G PoE+ 4SFP+ HI switches provide an interface card slot at the rear.

  • Page 71: Appendix D Cooling System

    Appendix D Cooling system The cooling system of the switch includes the air vents in the chassis, fan trays, and built-in fans of hot swappable power supplies. For correct operation of this cooling system, you must consider the site ventilation design when you plan the installation site for the switch. When the fan trays are operating, ambient air flows in through the air vents in the port-side panel and in the switch sides, circulates through the chassis and the power supplies, and exhausts through the air vents in the fan tray and power supply panels, as shown in...

  • Page 72

    Document conventions and icons Conventions This section describes the conventions used in the documentation. Port numbering in examples The port numbers in this document are for illustration only and might be unavailable on your device. Command conventions Convention Description Bold text represents commands and keywords that you enter literally as shown. Boldface Italic text represents arguments that you replace with actual values.

  • Page 73

    Network topology icons Convention Description Represents a generic network device, such as a router, switch, or firewall. Represents a routing-capable device, such as a router or Layer 3 switch. Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports Layer 2 forwarding and other Layer 2 features.

  • Page 74: Support And Other Resources

    Hewlett Packard Enterprise Support Center More Information on Access to Support Materials page: www.hpe.com/support/AccessToSupportMaterials IMPORTANT: Access to some updates might require product entitlement when accessed through the Hewlett Packard Enterprise Support Center. You must have an HP Passport set up with relevant entitlements.

  • Page 75: Customer Self Repair, Documentation Feedback

    Websites Website Link Networking websites Hewlett Packard Enterprise Information Library for www.hpe.com/networking/resourcefinder Networking Hewlett Packard Enterprise Networking website www.hpe.com/info/networking Hewlett Packard Enterprise My Networking website www.hpe.com/networking/support Hewlett Packard Enterprise My Networking Portal www.hpe.com/networking/mynetworking Hewlett Packard Enterprise Networking Warranty www.hpe.com/networking/warranty General websites Hewlett Packard Enterprise Information Library www.hpe.com/info/enterprise/docs Hewlett Packard Enterprise Support Center...

  • Page 76

    part number, edition, and publication date located on the front cover of the document. For online help content, include the product name, product version, help edition, and publication date located on the legal notices page.

  • Page 77

    Index IRF member switches in a ToR solution, Numerics IRF member switches in one rack, 10/100/1000 Base-T autosensing Ethernet IRF physical ports, combo interface, planning IRF connections, port, power cord, port LED, PSR150-D1(JD366B), 19-inch rack PSR720-56A(JG544A)/PSR1110-56A(JG545A)/ mounting bracket kit, PSR150-A1(JD362B), switch installation, USB mini console cable, console...

  • Page 78

    PSR720-56A/PSR1110-56A(JG544A/JG545A) combo interface technical specifications, power supply installation, connecting PSR150-D1(JD366B), PSR720-56A/PSR1110-56A(JG544A/JG545A) connecting power supply removal, PSR720-56A(JG544A)/PSR1110-56A(JG545A)/ troubleshooting power supply failure, PSR150-A1(JD362B), electromagnetic interference. See EMI prevention console port technical specifications, EMI prevention, fan tray status LED, emulation (parameter), grounding switch, environment grounding switch through AC power cord, examining installation site,...

  • Page 79

    installing 10/100/1000 Base-T autosensing Ethernet port, accessories, fan tray status LED, EMI prevention, interface card port status, examining installation site, interface card status, fan tray, management Ethernet port, front and rear mounting bracket kit, port mode, front mounting bracket kit, power supply input status, interface card, 24, power supply output status,...

  • Page 80

    connecting IRF physical ports, installing switch in 19-inch rack, identifying IRF member switch physical mounting switch on workbench, ports, planning IRF connections, LED (SFP+), planning IRF fabric installation site, QSFP+, planning IRF member IDs, setting up IRF fabric, planning IRF topology, SFP, rack-mounting by using front and rear mounting SFP+,...

  • Page 81

    planning IRF cabling scheme, 36, planning IRF member IDs, safety ports, EMI prevention, powering on, grounding switch through AC power cord, setting configuration environment, grounding the switch, setting terminal parameters, grounding the switch with a grounding setting up IRF fabric, conductor buried in the earth ground, technical specifications, grounding the switch with grounding strip,...

  • Page 82

    configuration terminal display problems, fan failure, garbled display, no display, power supply failure, port, verify the IRF fabric setup, 39, verifying IRF fabric setup, 39, switch installation, VT100, workbench mounting switch,...

Comments to this Manuals

Symbols: 0
Latest comments: