HP FlexNetwork NJ5000 User Manual page 150

Figure 145 Network diagram
Configuring Switch A
Create VLAN 2:
1.
a. Select Network > VLAN from the navigation tree.
b. Click the Create tab.
c. Enter VLAN ID 2.
d. Click Create.
Figure 146 Creating VLAN 2
Configure GigabitEthernet 1/0/1 as a hybrid port and configure its PVID as VLAN 2:
2.
a. Select Device > Port Management from the navigation tree.
b. Click the Setup tab.
c. Select Hybrid from the Link Type list.
d. Select the PVID box and enter 2 in the field.
e. Select GigabitEthernet 1/0/1 from the chassis front panel.
f. Click Apply.
138