The destination device responds with an ICMP port-unreachable message because the packet
5.
from the source has an unreachable port number. In this way, the source device gets the
address of the destination device.
In this way, the source device can get the addresses of all Layer 3 devices on the path.
Ping operation
Configuring IPv4 Ping
Select Network > Diagnostic Tools from the navigation tree.
1.
Click the IPv4 Ping tab.
2.
The ping configuration page appears.
Figure 255 Ping configuration page
Enter the IP address or the host name of the destination device in the Destination IP address
3.
or host name field.
Click Start.
4.
The output is displayed in the Summary area.
Figure 256 IPv4 ping output
248