Configuring Switch B - HP FlexNetwork NJ5000 User Manual

Click Close on the progress dialog box when the progress dialog box prompts that the
7.
configuration succeeds.
Figure 188 The global setup tab

Configuring Switch B

(Optional.) Enable LLDP on port GigabitEthernet 1/0/1. By default, LLDP is enabled on
1.
Ethernet ports.
Set the LLDP operating mode to Tx on GigabitEthernet 1/0/1:
2.
a. From the navigation tree, select Network > LLDP.
By default, the Port Setup tab is displayed.
b. Click the
c. Select Tx from the LLDP Operating Mode list.
Click Apply.
3.
A progress dialog box appears.
Click Close on the progress dialog box when the progress dialog box prompts that the
4.
configuration succeeds.
icon for port GigabitEthernet 1/0/1.
191