HP FlexNetwork NJ5000 User Manual page 146

Figure 137 Network diagram
Configuring Switch A
Create VLAN 2:
1.
a. Select Network > VLAN from the navigation tree.
b. Click the Create tab.
c. Enter VLAN ID 2.
d. Click Create.
Figure 138 Creating VLAN 2
Configure GigabitEthernet 1/0/1 as a hybrid port:
2.
a. Select Device > Port Management from the navigation tree.
b. Click the Setup tab.
c. Select Hybrid from the Link Type list.
d. Select GigabitEthernet 1/0/1 from the chassis front panel.
e. Click Apply.
134