Finishing Configuration Wizard - HP FlexNetwork NJ5000 User Manual

Item
Configure IPv4
address
Configure IPv6
link-local address

Finishing configuration wizard

After finishing the management IP address configuration, click Next.
The page displays your configurations. Review the configurations and if you want to modify the
settings click Back to go back to the page. Click Finish to confirm your settings and the system
performs the configurations.
Description
DHCP Configure how the VLAN interface obtains an IPv4 address:
•
DHCP—Select the option for the VLAN interface to get an IP
BOOTP
address through DHCP.
•
BOOTP—Select the option for the VLAN interface to get an IP
address through BOOTP.
Manual
•
Manual—Select this option to manually specify an IPv4 address
and the mask length for the VLAN interface.
IPv4
Specify an IPv4 address and the mask length for the VLAN interface.
address
Dotted decimal notation is also allowed for the mask length field.
These two fields are configurable if Manual is selected.
MaskLen
Auto Configure how the VLAN interface obtains an IPv6 link-local address.
•
Auto—Select this option for the device to automatically generate
a link-local address based on the link-local address prefix
(FE80::/64) and the link layer address of the interface.
Manual
•
Manual—Select this option to manually assign an IPv6 link-local
address to the interface.
IPv6 Specify an IPv6 link-local address for the VLAN interface.
address
This field is configurable if you select Manual. The address prefix must
be FE80::/64.
26