Configuring Accounting Methods For The Isp Domain - HP FlexNetwork NJ5000 User Manual

Item
Secondary Method
Login AuthZ
Name
Secondary Method
NOTE:
The HPE NJ5000 5G PoE+ switch does not support PPP authorization, portal authorization, and
command authorization.

Configuring accounting methods for the ISP domain

Select Authentication > AAA from the navigation tree.
1.
Click the Accounting tab.
2.
Figure 303 Accounting method configuration page
Select the ISP domain and specify accounting methods for the ISP domain, as described
3.
in Table
Click Apply.
4.
Description
Options include:
•
Local—Local authorization.
•
None—This method trusts all users and assigns default rights to them.
•
RADIUS—RADIUS authorization. You must specify the RADIUS scheme to be
used.
•
Not Set—The device uses the settings in the Default AuthZ area for LAN
access users.
Configure the authorization method and secondary authorization method for login
users.
Options include:
•
HWTACACS—HWTACACS authorization. You must specify the HWTACACS
scheme to be used.
•
Local—Local authorization.
•
None—This method trusts all users and assigns default rights to them.
•
RADIUS—RADIUS authorization. You must specify the RADIUS scheme to be
used.
•
Not Set—The device uses the settings in the Default AuthZ area for login
users.
104.
287