Adding A Class - HP FlexNetwork NJ5000 User Manual

Step
Configuring classifier-behavior associations for the
6.
policy
Applying a policy to a port
7.
Recommended queue scheduling configuration procedure
Step
Configuring queue scheduling on a port
Recommended GTS configuration procedure
Step
Configuring GTS on ports
Recommended rate limit configuration procedure
Step
Configuring rate limit on a port
Recommended priority mapping table configuration procedure
Step
Configuring priority mapping tables
Recommended priority trust mode configuration procedure
Step
Configuring priority trust mode on a port

Adding a class

Select QoS > Classifier from the navigation tree.
1.
Click the Add tab to enter the page for adding a class.
2.
Remarks
Add a policy.
Required.
Associate the traffic behavior with the class in the
QoS policy.
A class can be associated with only one traffic
behavior in a QoS policy. Associating a class
already associated with a traffic behavior will
overwrite the old association.
Required.
Apply the QoS policy to a port.
Remarks
Optional.
Configure the queue scheduling mode for a port.
Remarks
Optional.
Configure GTS parameters on ports.
Remarks
Required.
Limit the rate of incoming packets or outgoing
packets of a physical port.
Remarks
Required.
Set priority mapping tables.
Remarks
Required.
Set the priority trust mode of a port.
409