HP FlexNetwork NJ5000 User Manual page 111

Figure 101 Configuring an SNMP read and write community
Enable SNMP traps:
4.
a. Click the Trap tab.
The Trap tab page appears.
b. Select Enable SNMP Trap.
c. Click Apply.
Figure 102 Enabling SNMP traps
Configure a target host SNMP traps:
5.
a. Click Add on the Trap tab page.
The page for adding a target host of SNMP traps appears.
b. Select the IPv4/Domain option and type 1.1.1.2 in the following field, type public in the
Security Name field, and select v1 from the Security Model list.
c. Click Apply.
99