Modifying A Vlan Interface - HP FlexNetwork NJ5000 User Manual

Table 49 Configuration items
Item
Input a VLAN ID:
Configure
Primary
IPv4
Address
Configure
IPv6 Link
Local
Address

Modifying a VLAN interface

By modifying a VLAN interface, you can assign an IPv4 address, an IPv6 link-local address, and an
IPv6 site-local address, or global unicast address to the VLAN interface, and shut down or bring up
the VLAN interface.
After you modify the IPv4 address and status or the IPv6 address and status, or add an IPv6 unicast
address for a selected VLAN interface on the page for modifying VLAN interfaces, you must click the
correct Apply button to submit the modification.
After you change the IP address of the VLAN interface you are using to log in to the device, you will
be disconnected from the device. You can use the changed IP address to re-log in.
To modify a VLAN interface:
From the navigation tree, select Network > VLAN Interface.
1.
Click Modify.
2.
The page for modifying a VLAN interface appears.
Description
Enter the ID of the VLAN interface to be created. Before creating a VLAN interface,
make sure the corresponding VLAN exists.
DHCP Configure the way in which the VLAN interface gets an IPv4
address.
BOOTP
Allow the VLAN interface to get an IP address automatically by
selecting the DHCP or BOOTP option. Otherwise, select the
Manual option to manually assign the VLAN interface an IP
address.
Manual
After a VLAN interface fails to get an IP address through DHCP
multiple times, the device stops IP address application and
configures the default IP address for the interface.
Configure an IPv4 address for the VLAN interface.
IPv4
Address
This field is available after you select the Manual option.
Set the subnet mask length (or enter a mask in dotted decimal
Mask
notation format).
Length
This field is available after you select the Manual option.
Auto Configure the way in which the VLAN interface gets an IPv6
link-local address.
Select the Auto or Manual option:
•
Auto—The device automatically assigns a link-local address
Manual
to the VLAN interface based on the link-local address prefix
(FE80::/64) and the link-layer address of the VLAN interface.
•
Manual—Requires manual assignment.
Configure an IPv6 link-local address for the VLAN interface.
IPv6
This field is available after you select the Manual option. The prefix
Address
of the IPv6 link-local address you enter must be FE80::/64.
123
These items
are available
after you
select the
Configure
Primary
IPv4
Address
box.
These items
are available
after you
select the
Configure
IPv6 Link
Local
Address
box.