Configuring Ipv6 Ping; Traceroute Operation; Configuring Ipv4 Traceroute - HP FlexNetwork NJ5000 User Manual

5g poe+ walljack
Table of Contents

Advertisement

Configuring IPv6 Ping

Select Network > Diagnostic Tools from the navigation tree.
1.
Click the IPv6 Ping tab.
2.
The ping configuration page appears.
Figure 257 Ping configuration page
Enter the IP address or the host name of the destination device in the Destination IPv6
3.
address or host name field.
Click Start.
4.
The output is displayed in the Summary area.
Figure 258 IPv6 ping output

Traceroute operation

Before performing a traceroute operation, perform the following tasks:
Enable sending of ICMP timeout packets by executing the ip ttl-expires enable command on
intermediate devices.
Enable sending of ICMP destination unreachable packets by executing the ip unreachables
enable command on the destination device.

Configuring IPv4 traceroute

Select Network > Diagnostic Tools from the navigation tree.
1.
Click the IPv4 Traceroute tab.
2.
249

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents