Configuring Mld Snooping In A Vlan - HP FlexNetwork NJ5000 User Manual

Figure 222 Enabling dropping unknown IPv6 multicast data globally
Click Apply.
3.

Configuring MLD snooping in a VLAN

Select Network > MLD snooping from the navigation tree.
1.
Click the
2.
Figure 223 Configuring MLD snooping in a VLAN
Configure the parameters as described in
3.
Click Apply.
4.
Table 86 Configuration items
Item
MLD snooping
Version
icon for the VLAN.
Description
Enable or disable MLD snooping in the VLAN.
You can proceed with the subsequent configurations only if Enable is selected
here.
The default setting is MLDv1.
By configuring an MLD snooping version, you actually configure the versions of
MLD messages that MLD snooping can process.
•
MLDv1 snooping can process MLDv1 messages, but it floods MLDv2
messages in the VLAN instead of processing them.
Table 86.
221