Setting The Log Host - HP FlexNetwork NJ5000 User Manual

Field
Source
Level
Digest
Description

Setting the log host

Select Device > Syslog from the navigation tree.
1.
Click the Loghost tab.
2.
The log host configuration page appears.
Figure 34 Setting the log host
Configure the log host as described in
3.
Click Apply.
4.
Description
Displays the module that generated the system log.
Displays the severity level of the system log. The information is classified into
eight levels by severity:
•
Emergency—The system is unusable.
•
Alert—Action must be taken immediately.
•
Critical—Critical condition.
•
Error—Error condition.
•
Warning—Warning condition.
•
Notification—Normal but significant condition.
•
Information—Informational message.
•
Debug—Debug-level message.
Displays the brief description of the system log.
Displays the content of the system log.
Table
41
19.