Verifying The Configuration; Configuration Guidelines - HP FlexNetwork NJ5000 User Manual

c. Select Accounting Optional, and then select Enable from the list.
d. Select Default Accounting, and then select HWTACACS from the list.
e. Select system from the Name list.
f. Click Apply.
A progress dialog box appears.
g. When the configuration progress is complete, click Close.
Figure 345 Configuring an accounting method for the ISP domain

Verifying the configuration

# Initiate a connection to the HPE NJ5000 5G PoE+ switch from the host, and enter the username
hello@test and the password 123456. Verify that you can access the user interface of the HPE
NJ5000 5G PoE+ switch. (Details not shown.)
# Display online user connection information.
<HPE> display connection
Slot: 1
Index=0
IP=192.168.1.12
IPv6=N/A
Index=5
IP=0.0.0.0
Ipv6=N/A
Total 2 connection(s) matched on slot 1.
Total 2 connection(s) matched.

Configuration guidelines

When you configure the HWTACACS client, follow these guidelines:
•
You cannot delete an HWTACACS scheme that is being used for users, nor can you change the
server IP addresses of the scheme.
•
Except for deleting HWTACACS schemes and changing the IP addresses of the HWTACACS
servers, you can make any changes to HWTACACS parameters, no matter whether there are
users online or not.
, Username=hello
, Username=hello
319