Voice Vlan Configuration Examples; Configuring Voice Vlan On A Port In Automatic Voice Vlan Assignment Mode - HP FlexNetwork NJ5000 User Manual

5g poe+ walljack
Table of Contents

Advertisement

Figure 136 Adding OUI addresses to the OUI list
Add an OUI address to the list as described in
3.
Click Apply.
4.
Table 57 Configuration items
Item
OUI Address
Mask
Description

Voice VLAN configuration examples

Configuring voice VLAN on a port in automatic voice VLAN
assignment mode
Network requirements
As shown in
Configure VLAN 2 as the voice VLAN allowing only voice traffic to pass through.
The IP phone connected to hybrid port GigabitEthernet 1/0/1 sends untagged voice traffic.
GigabitEthernet 1/0/1 operates in automatic VLAN assignment mode. Set the voice VLAN
aging timer to 30 minutes.
Configure GigabitEthernet 1/0/1 to allow voice packets whose source MAC addresses match
the OUI addresses specified by OUI address 0011-2200-0000 and mask ffff-ff00-0000. The
description of the OUI address entry is test.
Description
Set the source MAC address of voice traffic.
Set the mask length of the source MAC address.
Set the description of the OUI address entry.
Figure
137:
Table
57.
133

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents