Configuring An Snmp Community - HP FlexNetwork NJ5000 User Manual

Figure 88 Adding rules to an SNMP view
Configure the parameters as described in
4.
Click Apply.
5.
NOTE:
You can also click the
85, and then you can enter the page to modify the view.

Configuring an SNMP community

Select Device > SNMP from the navigation tree.
1.
Click the Community tab.
2.
The Community tab appears.
Figure 89 Configuring an SNMP community
Click Add.
3.
The Add SNMP Community page appears.
Table
icon corresponding to the specified view on the page as shown in
91
40.
Figure