Port Management Configuration Example; Network Requirements - HP FlexNetwork NJ5000 User Manual

Figure 43 The Detail tab

Port management configuration example

Network requirements

As shown in
•
Server A, Server B, and Server C are connected to GigabitEthernet 1/0/1, GigabitEthernet 1/0/2,
and GigabitEthernet 1/0/3 of the switch, respectively. The rates of the network adapters of these
servers are all 1000 Mbps.
•
The switch connects to the external network through GigabitEthernet 1/0/4 whose speed is
1000 Mbps.
To avoid congestion at the egress port GigabitEthernet 1/0/4, configure the autonegotiation speed
range on GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 as 100 Mbps.
Figure 44 Network diagram
Figure 44:
52