Device Reboot; Electronic Label - HP FlexNetwork NJ5000 User Manual

Item
slave boards at one time
Reboot after the
upgrade finished

Device reboot

CAUTION:
• Before rebooting the device, save the configuration. Otherwise, all unsaved configuration will be
lost after device reboot.
• When the device reboots, re-log in to the device.
Select Device > Device Maintenance from the navigation tree.
1.
Click the Reboot tab.
2.
Figure 22 Device reboot page
Enable or disable the "Check whether the current configuration is saved in the next
3.
startup configuration file" option.
Click Reboot. A confirmation dialog box appears.
4.
Click OK.
5.
If you select Check whether the current configuration is saved in the next startup
configuration file, the system will check the configuration before rebooting the device. If
the check succeeds, the system reboots the device. If the check fails, a dialog box appears,
telling you that the current configuration and the saved configuration are inconsistent, and
the device is not rebooted. In this case, save the current configuration manually before you
can reboot the device.
If you do not select the box, the system reboots the device directly.

Electronic label

Electronic label allows you to view information about the device electronic label, which is also known
as the permanent configuration data or archive information. The information is written into the
storage medium of a device or a card during the debugging and testing processes, and includes card
name, product bar code, MAC address, debugging and testing dates, and manufacture name.
Select Device > Device Maintenance from the navigation tree.
1.
Click the Electronic Label tab to view the electronic label information.
2.
Description
NJ5000 5G PoE+ switch does not support this option.
Specify whether to reboot the device to make the upgraded software take effect
after the application file is uploaded.
33