Saving The Configuration - HP FlexNetwork NJ5000 User Manual

Figure 37 Restoring the configuration
Click the upper Browse button.
3.
The file upload dialog box appears.
Select the .cfg file to be uploaded, and click OK.
4.
Click the lower Browse button.
5.
The file upload dialog box appears.
Select the .xml file to be uploaded, and click OK.
6.

Saving the configuration

You save the running configuration to both the .cfg configuration file and .xml configuration file that
will be used at the next startup.
Saving the configuration takes some time.
Only one administrator can save the configuration at a moment. If you save the configuration while
the system is saving the configuration as required by another administrator, the system prompts you
to try again later.
You can save the configuration in either of the following modes:
•
Fast mode.
To save the configuration in fast mode, click the Save button at the upper right of the auxiliary
area.
Figure 38 Saving the configuration
•
Common mode.
To save the configuration in common mode:
44