Configuring The Switch - HP FlexNetwork NJ5000 User Manual

Configuring the switch

As shown in
1.
Figure 45 Configuring the speed of GigabitEthernet 1/0/4
Batch configure the autonegotiation speed range on GigabitEthernet 1/0/1, GigabitEthernet
2.
1/0/2, and GigabitEthernet 1/0/3 as 100 Mbps:
a. On the Setup tab, select Auto 100 from the Speed list.
b. Select 1, 2, and 3 on the chassis front panel.
1, 2, and 3 represent ports GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and
GigabitEthernet 1/0/3.
c. Click Apply.
Figure 45, set the speed of GigabitEthernet 1/0/4 to 1000 Mbps:
53