Managing Users; Adding A Local User - HP FlexNetwork NJ5000 User Manual

Managing users

The user management function allows you to do the following:
•
Adding a local user, and specifying the password, access level, and service types for the user.
•
Setting the super password for non-management level users to switch to the management
level.
•
Switching to the management level from a lower level.

Adding a local user

Select Device > Users from the navigation tree.
1.
Click the Create tab.
2.
Figure 55 Adding a local user
Configure a local user as described in
3.
Click Apply.
4.
Table 24 Configuration items
Item
Username
Access Level
Password
Description
Enter a username for the user.
Select an access level for the user.
Users of different levels can perform different operations. User levels, in order from low
to high, are as follows:
•
Visitor—A visitor level user can perform only ping and traceroute operations.
They cannot access the data on the device or configure the device.
•
Monitor—A monitor level user can perform ping and traceroute operations and
access the data on the device, but they cannot configure the device.
•
Configure—A configure level user can perform ping and traceroute operations,
access data on the device, and configure the device, but they cannot upgrade the
software, add/delete/modify users, or back up or restore the configuration file.
•
Management—A management level user can perform any operations on the
device.
Set the password for the user.
Table 24.
62