Configuring Voice Vlan On Ports; Adding Oui Addresses To The Oui List - HP FlexNetwork NJ5000 User Manual

Configuring voice VLAN on ports

Select Network > Voice VLAN from the navigation tree.
1.
Click the Port Setup tab.
2.
Figure 135 Configuring voice VLAN on ports
Configure the voice VLAN function for ports as described in
3.
Click Apply.
4.
Table 56 Configuration items
Item
Voice VLAN port mode
Voice VLAN port state
Voice VLAN ID
Select Ports

Adding OUI addresses to the OUI list

Select Network > Voice VLAN from the navigation tree.
1.
Click the OUI Add tab.
2.
Description
Set the voice VLAN assignment mode of a port to:
•
Auto—Automatic voice VLAN assignment mode
•
Manual—Manual voice VLAN assignment mode
Select Enable or Disable in the list to enable or disable the voice VLAN
function on the port.
Set the voice VLAN ID of a port when the voice VLAN port state is set to
Enable.
Select the port on the chassis front panel.
You can select multiple ports to configure them in bulk. The numbers of the
selected ports will be displayed in the Ports selected for voice VLAN field.
NOTE:
To set the voice VLAN assignment mode of a port to automatic, you must
make sure that the link type of the port is trunk or hybrid, and that the port
does not belong to the voice VLAN.
132
Table 56.