HP FlexNetwork NJ5000 User Manual page 198

Field
Aggregation port ID
Maximum frame Size
Device class
Media policy type
Unknown Policy
VLAN tagged
Media policy VlanID
Media policy L2 priority
Media policy Dscp
HardwareRev
FirmwareRev
SoftwareRev
SerialNum
Manufacturer name
Model name
Asset tracking identifier
PoE PSE power source
Port PSE priority
Description
Link aggregation group ID. It is 0 if the neighbor port is not assigned to
any link aggregation group.
Maximum frame size supported on the neighbor port.
MED device class:
•
Connectivity device—An intermediate device that provide
network connectivity.
•
Class I—A generic endpoint device. All endpoints that require the
discovery service of LLDP belong to this category.
•
Class II—A media endpoint device. The class II endpoint devices
support the media stream capabilities and the capabilities of
generic endpoint devices.
•
Class III—A communication endpoint device. The class III
endpoint devices directly support end users of the IP
communication system. Providing all capabilities of generic and
media endpoint devices, Class III endpoint devices are used
directly by end users.
Media policy type:
•
Unknown.
•
Voice.
•
Voice signaling.
•
Guest voice.
•
Guest voice signaling.
•
Soft phone voice.
•
Videoconferencing.
•
Streaming video.
•
Video signaling.
Indicates whether the media policy type is unknown.
Indicates whether packets of the media VLAN are tagged.
ID of the media VLAN.
Layer 2 priority.
DSCP value.
Hardware version of the neighbor.
Firmware version of the neighbor.
Software version of the neighbor.
Serial number advertised by the neighbor.
Manufacturer name advertised by the neighbor.
Model name advertised by the neighbor.
Asset ID advertised by the neighbor. This ID is used for the purpose of
inventory management and asset tracking.
PSE power source type:
•
Primary.
•
Backup.
PoE power supply priority of PSE ports:
•
Unknown—Unknown PSE priority.
•
Critical—Priority level 1.
•
High—Priority level 2.
186