HP FlexNetwork NJ5000 User Manual page 114

Figure 107 Creating an SNMP view (2)
Configure an SNMP group:
3.
a. Click the Group tab.
b. Click Add.
The page in Figure 108
c. Type group1 in the Group Name field, select view1 from the Read View list, select view1
from the Write View list.
d. Click Apply.
Figure 108 Creating an SNMP group
Configure an SNMP user:
4.
a. Click the User tab.
b. Click Add.
The page in Figure 109
c. Type user1 in the User Name field, select Auth/Priv from the Security Level list, select
group1 from the Group Name list, select MD5 from the Authentication Mode list, type
authkey in the Authentication Password and Confirm Authentication Password fields,
select DES56 from the Privacy Mode list, and type prikey in the Privacy Password and
Confirm Privacy Password fields.
appears.
appears.
102