802.X With Acl Assignment Configuration Example - HP FlexNetwork NJ5000 User Manual

Figure 284 Configuring the AAA accounting method for the ISP domain
d. Click Apply.
e. After the configuration process is complete, click Close.

802.X with ACL assignment configuration example

Network requirements
As shown in
RADIUS server at 10.1.1.1 as the authentication and authorization server and the RADIUS server at
10.1.1.2 as the accounting server. Assign an ACL to GigabitEthernet 1/0/1 to deny the access of
802.1X users to the FTP server at 10.0.0.1/24.
Figure 285 Network diagram
Configuring IP addresses
# Assign an IP address to each interface as shown in
Configuring a RADIUS scheme
Create a RADIUS scheme:
1.
a. From the navigation tree, select Authentication > RADIUS, and then click Add.
b. Enter the scheme name system.
c. Select the server type Extended.
d. Select Without domain name from the Username Format list.
e. Click Apply.
Figure 285, perform 802.1X authentication on port GigabitEthernet 1/0/1. Use the
Figure 285. (Details not shown.)
273