HP FlexNetwork NJ5000 User Manual page 408

Figure 435 Configuring a rule for an advanced IPv6 ACL
Add a rule for an advanced IPv6 ACL as described in
3.
Click Add.
4.
Table 140 Configuration items
Item
Select Access Control List (ACL)
Rule ID
Operation
Check Fragment
Description
Select the advanced IPv6 ACL for which you want to configure rules.
Select the Rule ID box and enter a number for the rule.
If you do not specify the rule number, the system will assign one
automatically.
If the rule number you specify already exists, the following
operations modify the configuration of the rule.
Select the operation to be performed for IPv6 packets matching the
rule:
•
Permit—Allows matched packets to pass.
•
Deny—Drops matched packets.
Select this box to apply the rule to only non-first fragments.
If you do no select this box, the rule applies to all fragments and
non-fragments.
396
Table 140.