By default, the Port Setup tab is displayed.
Select one or multiple ports on the port list.
2.
Click Modify Selected to enter the page for modifying these ports in batch.
3.
Figure 177 Modifying LLDP settings on ports in batch
Set the LLDP settings for these ports as described in
4.
Click Apply.
5.
A progress dialog box appears.
Click Close on the progress dialog box when the progress dialog box prompts that the
6.
configuration succeeds.
Configuring LLDP globally
From the navigation tree, select Network > LLDP.
1.
Click the Global Setup tab.
2.
Table
181
75.