Setting Lldp Parameters For Ports In Batch - HP FlexNetwork NJ5000 User Manual

Item
DOT1
TLV
Setting
DOT3
TLV
Setting
MED
TLV
Setting

Setting LLDP parameters for ports in batch

From the navigation tree, select Network > LLDP.
1.
Description
format (a numeric or character string in the TLV).
If no management address is specified, the main IP address of the
lowest VLAN carried on the port is used. If no main IP address is
assigned to the VLAN, 127.0.0.1 is used.
Port VLAN ID Select the box to include the PVID TLV in transmitted LLDP frames.
Select the box to include port and protocol VLAN ID TLVs in
Protocol VLAN
transmitted LLDP frames and specify the VLAN IDs to be advertised.
ID
If no VLAN is specified, the lowest protocol VLAN ID is transmitted.
Select the box to include VLAN name TLVs in transmitted LLDP
frames, and specify the VLAN IDs to be advertised.
VLAN Name
If no VLAN is specified, the lowest VLAN carried on the port is
advertised.
Link Select the box to include the link aggregation TLV in transmitted LLDP
Aggregation frames.
MAC/PHY
Select the box to include the MAC/PHY configuration/status TLV in
Configuration/St
transmitted LLDP frames.
atus
Maximum Select the box to include the maximum frame size TLV in transmitted
Frame Size LLDP frames.
Select the box to include the power via MDI TLV and power stateful
Power via MDI
control TLV in transmitted LLDP frames.
LLDP-MED Select the box to include the LLDP-MED capabilities TLV in transmitted
Capabilities LLDP frames.
Select the box to include the hardware revision TLV, firmware revision
Inventory TLV, software revision TLV, serial number TLV, manufacturer name
TLV, model name TLV and asset ID TLV in transmitted LLDP frames.
Select the box to include the network policy TLV in transmitted LLDP
Network Policy
frames.
Extended
Select the box to include the extended power-via-MDI TLV in
Power-via-MDI
transmitted LLDP frames.
Capability
Select the box to encode the emergency call number in the location
Emergency
identification TLV in transmitted LLDP frames and set the emergency
Number
call number.
Address Select Address to encode the civic address information of the network
connectivity device in the location identification TLV in transmitted
LLDP frames. In addition, set the device type (DHCP server, switch, or
LLDP-MED endpoint), country code, and network device address.
When you configure the network device address, select the address
information type from the list, enter the address information in the field
Network Device
below, and click Add next to the field to add the information to the
Address
address information list below. To remove an address information
entry, select the entry from the list, and click Delete. The civic address
information can include language, province/state, country, city, street,
house number, name, postal/zip code, room number, post office box,
and, if necessary, additional information.
180