HP FlexNetwork NJ5000 User Manual page 100

Figure 84 Setup tab
Configure SNMP settings on the upper part of the page as described in
2.
Click Apply.
3.
Table 39 Configuration items
Item
SNMP
Local Engine ID
Maximum Packet Size
Contact
Location
SNMP Version
Description
Specify to enable or disable SNMP agent.
Configure the local engine ID.
The validity of a user after it is created depends on the engine ID of the
SNMP agent. If the engine ID when the user is created is not identical to
the current engine ID, the user is invalid.
Configure the maximum size of an SNMP packet that the agent can
receive or send.
Set a character string to describe contact information for system
maintenance.
If the device is faulty, the maintainer can contact the manufacture factory
according to the contact information of the device.
Set a character string to describe the physical location of the device.
Set the SNMP version run by the system.
88
Table 39.