HP FlexNetwork NJ5000 User Manual page 27

Menus
Advanced
MLD Snooping
Basic
Advanced
IPv4 Routing
Summary
Create
Remove
IPv6 Routing
Summary
Create
Remove
DHCP
DHCP Snooping
Service
Service
Diagnostic Tools
IPv4 Ping
IPv6 Ping
Tasks
and the IGMP snooping multicast entry information.
Configure IGMP snooping globally or in a VLAN.
Display the IGMP snooping configuration information on a
port.
Configure IGMP snooping on a port.
Display global MLD snooping configuration information or
the MLD snooping configuration information in a VLAN,
and the MLD snooping multicast entry information.
Configure MLD snooping globally or in a VLAN.
Display the MLD snooping configuration information on a
port.
Configure MLD snooping on a port.
Display the IPv4 active route table.
Create an IPv4 static route.
NOTE:
The switch does not provide Layer 3 forwarding service.
The IPv4 routing feature only ensures that the switch is
accessible on an IPv4 network. Use this feature only if you
want to manage the switch from a different subnet than the
switch.
Delete the selected IPv4 static routes.
Display the IPv6 active route table.
Create an IPv6 static route.
NOTE:
The switch does not provide Layer 3 forwarding service.
The IPv6 routing feature only ensures that the switch is
accessible on an IPv6 network. Use this feature only if you
want to manage the switch from a different subnet than the
switch.
Delete the selected IPv6 static routes.
Display the status, trusted and untrusted ports and DHCP
client information about DHCP snooping.
Enable/disable DHCP snooping, and configure DHCP
snooping trusted and untrusted ports.
Display the states of services: enabled or disabled.
Enable/disable services, and set related parameters.
Ping an IPv4 address or host name.
Ping an IPv6 address or host name.
15
User level
Configure
Monitor
Configure
Monitor
Configure
Monitor
Configure
Monitor
Configure
Configure
Monitor
Configure
Configure
Monitor
Configure
Configure
Management
Visitor
Visitor