Setting Buffer Capacity And Refresh Interval - HP FlexNetwork NJ5000 User Manual

Table 19 Configuration items
Item
IPv4/Domain
Loghost IP/Domain
IPv6
Loghost IP

Setting buffer capacity and refresh interval

Select Device > Syslog from the navigation tree.
1.
Click the Log Setup tab.
2.
The syslog configuration page appears.
Figure 35 Syslog configuration page
Configure buffer capacity and refresh interval as described in
3.
Click Apply.
4.
Table 20 Configuration items
Item
Buffer Capacity
Refresh Interval
Description
Specify the IPv4 address or domain
name of the log host.
Set the IPv6 address of the log host.
Description
Set the number of logs that can be stored in the log buffer.
Set the log refresh interval.
You can select manual refresh or automatic refresh:
•
Manual—Click Refresh to view the latest log information.
•
Automatic—Select to refresh the Web interface every 1 minute, 5 minutes,
or 10 minutes.
42
IMPORTANT:
You can specify up to four log hosts.
Table 20.