Voice Vlan Configuration Examples; Configuring Voice Vlan On A Port In Automatic Voice Vlan Assignment Mode - HP 1920 Gigabit Ethernet Switch Series User Manual
Hp 1920 gigabit ethernet switch series
Hide thumbs
Also See for 1920 Gigabit Ethernet Switch Series:
- User manual (547 pages) ,
- Getting started manual (33 pages) ,
- Supplementary manual (63 pages)
Table of Contents
Advertisement
Voice VLAN configuration examples
Configuring voice VLAN on a port in automatic voice VLAN
assignment mode
Network requirements
As shown in
Configure VLAN 2 as the voice VLAN allowing only voice traffic to pass through.
•
The IP phone connected to hybrid port GigabitEthernet 1/0/1 sends untagged voice traffic.
•
•
GigabitEthernet 1/0/1 operates in automatic VLAN assignment mode. Set the voice VLAN aging
timer to 30 minutes.
Configure GigabitEthernet 1/0/1 to allow voice packets whose source MAC addresses match the
•
OUI addresses specified by OUI address 001 1-2200-0000 and mask ffff-ff00-0000. The
description of the OUI address entry is test.
Figure 153 Network diagram
Configuring Switch A
1.
Create VLAN 2:
a.
Select Network > VLAN from the navigation tree.
b.
Click the Create tab.
c.
Enter VLAN ID 2.
d.
Click Create.
Figure
153:
163
Hide quick links:
Advertisement
Table of Contents
