Voice Vlan Configuration Examples; Configuring Voice Vlan On A Port In Automatic Voice Vlan Assignment Mode - HP V1910 User Manual

Voice VLAN configuration examples

Configuring voice VLAN on a port in automatic voice VLAN
assignment mode
Network requirements
As shown in a,
Configure VLAN 2 as the voice VLAN allowing only voice traffic to pass through.

The IP phone connected to hybrid port GigabitEthernet 1/0/1 sends untagged voice traffic.

GigabitEthernet 1/0/1 operates in automatic VLAN assignment mode. Set the voice VLAN aging

timer to 30 minutes.
 Configure GigabitEthernet 1/0/1 to allow voice packets whose source MAC addresses match the
OUI addresses specified by OUI address 0011-2200-0000 and mask FFFF-FF00-0000. The
description of the OUI address entry is test.
Network diagram for automatic voice VLAN assignment mode configuration
a.
Switch A
VLAN 2
GE1/0/1
VLAN 2
010-1001
OUI: 0011-2200-0000
Mask: ffff-ff00-0000
Configuration procedure
# Create VLAN 2.
Select Network  VLAN from the navigation tree, and click the Create tab to enter the page shown in

a.
Switch B
Internet
0755-2002
160
GE1/0/3